Custum Serch

Latest Publications


The IRF740 is an N-Channel COMPETENCE MOSFET that can switch freightage up to 400V.This Mosfet could switch freightage that uses up to 10A, it can turn on by giving a gate gateway voltage of 10V covering the Gate and Source pin.

Since the IRF740 MOSFET is for switching high current high voltage freightage it has a parallel high gate voltage, consequently cannot be used right with an I/O pin of a CPU. 

If you lodge a Mosfet with short gate voltage then try IRF520 or BSS138 etc.

One outstanding drawback of this Mosfet is its high on-resistance (RDS) cost whose is about 0.55 ohms

 Yet the IRF740 MOSFET cannot be pre-owned in approach where high switching organization is required.The Mosfet Need operator circuit to supply 10volt to the gate pin of this Mosfet the uncomplicated operator circuit can be made using a transistor. This is correspondingly low price and has very little heated resistance, Add to this MOSFET also has very good switching speeds and therefore can be used in DC-DC Inverter circuits.

Configuration Of   IRF740 N-Channel  Mosfet

1       Source s     N-type       Current         Source (largest 10A)
2       Drain D           N-type        Electrons Emitter (Drain)
3       Gate  G           P-type       Electrons  collector (Gate)

IRF740 Pinout is made up of 3 pins in total. These pins from top to bottom with name and types are agreed beyond the table. Electrons glide from Drain to the source terminal.The output current hangs on the voltage appeal to the Gate terminal.

Review Of  IRF740

Gate entry voltage (VGS-th) is 10V (limit = ±20V)

  N-Channel Power MOSFET

  Solid  Drain Current (ID): 10A

  Drain Source Resistance (RDS) is

  Drain to Source crash Voltage: 40

 Accessible in To-220

 Rise time and the fall time is 27nS and 24ns

Replacement  of IRF740

The Replacement of IRF740 are:IRFB13N50A, UF450A, SSF13N15,BSS138, IRF520, IRF3205, 2N7002, BS170, IRF1010E, BSS123

Appeal Of IRF740

LED dimmers or flashers

DC-DC Inverters

High-Speed switching applications

Switching high power devices Converter Circuits

Control of   motors speed

No comments